|
How to
Measure Your Windows Like a Pro
Overview:
Measuring for window treatments is much
easier than most people think.
Here are five important things
to remember.
Please be sure to read the specific measuring
instructions linked below before ordering too.
1.
Use a
steel measuring tape.
2.
Measure to the nearest eighth of an inch - don't
round your measurements.
3.
On your notes, clearly indicate which measurement is the width
and which is the height.
It is very common to transpose
measures. Please note width first, then height.
4.
You need to provide the exact overall blind size needed for an
outside mount.
5.
Again don't worry if your out a little bit for our estimate.
If your ordering from out of town and are taking your own
measurements for a purchase, we will walk you through it.
Choose Inside or Outside Mount:
Before taking any measurements, step back from your window and
decide if you
want to mount the window treatment inside the
window recess or outside on the
wall or moulding.
For an
inside mount, the window opening must have enough unobstructed
depth
to allow mounting.
Tip: For a flush inside mount (the blind completely
recessed so that no part of the
blind projects out of the
opening) check that you have enough depth and make sure
you
request the valances be made the same width as blind since
they are normally
made an inch or two wider.
Tip: We usually recommend an inside mount when possible
because it provides
a cleaner look. However, an outside mount
can make a window appear larger or
hide an unattractive
window. When you specify inside mount, we will make a size
deduction to allow for operating clearance. We will deduct up
to 1/4" from each side
(on vertical blinds there is also a
height deduction of 1/4"). The deductions are
made so that the
blind will not rub or scratch your window frame. If you
specify
an outside mount, we will not take any size
deductions. Your blind will be made
at the exact size you
specify. So you must ADD to the opening measurement to
allow
for overlap and mounting brackets. Be sure to read our product
specific
measuring instructions before ordering. When
measuring, don't be surprised
if your windows aren't square, it probably won't be noticeable
Inside Mount (recessed):
|
|
|
For Inside Mount we need the exact
Measurements of your window so we can make the necessary
deduction for the Mounting Bracket
Measure the the exact inside width
and length of the window opening between jambs.
As some windows may not be a perfect
square, take a measurement in three locations for both
length and width.
Record the shortest width dimension
and the longest length. |
Outside Mount: |
| |
Used for shallow window casings, door
mounts and custom looks.
Measure the exact outside width and
length from to molding.
To overlap the window, we recommend
that you add 5 to 6 inch to your width and length
measurements. |
|
|
